GR6150-2200 Six-axis robotic arm (manipulator)
Spray Robot · Load capacity 15kg · Reach: 2203mm
GR6150-2200 Specifications
GR6150-2200 spraying robot, load capacity 15kg, reach reach 2203mm, 6 axes, equipped with M-type control cabinet.
Model introduction
GR6150-2200 · Load capacity 15kg · Reach 2203mm · 6-axis · M-type control cabinet. Parameters are extracted from the product selection table on the Efft official website.
GR Series Spraying Robots · Series technical features
Load 8-15kg · Explosion-proof coating conditions
The official website categorizes 9 models under "Spraying," including the GR6 six-axis + GR3 three-axis bolt-drive models.
GR6100-3800 has a 3750mm reach, suitable for large workpieces and spray booth layouts (official selection table).
All models come with M-type control cabinets (official website selection table).
EFORT supports the growth of the supply chains of car companies like Chery, with painting as their traditional process direction.
Typical application scenarios
Common application processes for this model (click to view process details):
GR Series Spraying Robots · Other models in the same series
Compare load and reach to choose the model that best suits your process.
GR6150-2200 model positioning and working condition adaptation
GR6150-2200 This is an industrial robot model belonging to the Effter GR series spraying robot, with a rated load of 15kg and a movement radius of 2203mm. EFORT's technical foundation is the acquisition of Italy's EVOLUT (integrated) and WFC (woodworking), with mature spraying and general handling process packages; The control platform is an M-type control cabinet, and the program ecosystem consists of graphical programming + process package calling.
From the perspective of working condition adaptation, typical applications for positioning light loads (15kg) are:Machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium-sized partsCommon application processes for this model include painting, painting, and gluing. The long reach (2203mm) covers multiple stations and large pallets, reducing robot movement or coordination with ground track expansion. The end fixture is counted as a load from the most important point—the total of gripper + workpiece + sensor should not exceed 80% of the rated value. Workpieces with high inertia (long rod/uneven load) should be checked separately.
| Parameters | Engineering interpretation and usage recommendations |
|---|---|
| Rated load capacity: 15kg | It is recommended to reserve a load margin of 20%–30%; Verification is made by combining end self-weight + workpiece + imbalanced load inertia, especially sensitive to high-speed conditions |
| Movement radius: 2203mm | Determine the radius of the workcell layout: bins, tooling, and fences are bounded by maximum arm span + safety distance; Verify the accessibility of each pick-and-place point during cross-station service |
| Number of axes: 6 | Six-axis all-posture capability, the preferred choice for complex trajectory and inclined surface operations |
| Controller: M-type control cabinet | Decide on the process ecosystem, spare parts channels, and second-hand residual value; Currently, spare parts channels are smooth, and repair and upgrade paths are mature |
Control systems and common failure modes
The M-type control cabinet controller accompanying the GR6150-2200 features a programming language and development environment of graphical programming + process package calls. Maintenance of this generation of control platforms focuses on three basic components: power, storage, and cooling—most "sudden downtime" can be detected in advance when preventive maintenance is in place.
| Failure mode | Typical performance | Disposal recommendations |
|---|---|---|
| Driver alarm and encoder abnormality | Driver alarm and encoder abnormality | Included as a mandatory inspection item for annual maintenance, with spare parts stocked in advance |
| Explosion-proof parts of spraying machine models are aging | Explosion-proof parts of spraying models aged (sealing and grounding) | Initial interpretation of alarm codes by reference with manuals, remote diagnosis allows for early positioning |
| The teach pendant malfunctioned | The teach pendant malfunctioned | Daily inspection coverage, with abnormal trends (abnormal noises/temperature rise/errors) recorded |
| Communication between IO and bus is abnormal | Communication between IO and bus is abnormal | Quarterly dust removal maintenance and cabinet temperature monitoring |
| Maintenance projects | Cycle recommendations | Key points |
|---|---|---|
| Spray explosion-proof models undergo annual inspection according to explosion-proof regulations (grounding, sealing, certification effectiveness). | According to the manufacturer's manual cycle | Spray explosion-proof models undergo annual inspection according to explosion-proof regulations (grounding, sealing, certification effectiveness). |
| Routine management of batteries and lubrication | According to the manufacturer's manual cycle | Routine management of batteries and lubrication |
| Program parameters are backed up regularly | Periodically | Program parameters are backed up regularly |
| Cable and drag chain inspection | every six months | Insulation, shielding, and bending radius inspection of power and encoder lines, as well as wear of cables inside the drag chain, are the main causes of intermittent faults |
| Zero point and accuracy retest | Every year | Repeatability measured by dial gauges or laser trackers, drift trend digitization—accuracy degradation can be seen six months in advance |
| Control cabinet dust removal and fans | Every quarter | Filter cleaning, fan speed and noise checks, cabinet temperature recording; Dust environments shorten the cycle |
Henghuan's service capabilities for GR6150-2200
This site is a third-party robotics technology service provider. The eight major business supports related to the GR6150-2200 are as follows (sorted by service frequency of each model):
- Maintenance and repair: For the on-site diagnosis, board-level maintenance, and annual maintenance contract for GR6150-2200—for sprayed explosion-proof models, we follow SOPs for annual inspection (grounding, sealing, certification effectiveness) and other brand-specific items according to explosion-proof procedures, with same-day response from Sichuan and Chongqing.
- Used & in-stock robot sales: Second-hand circulation is increasing, and the procurement of spray painting models requires verification of explosion-proof certification documents; The GR6150-2200 or equivalent models in the inventory come with a full-function test report and a 12-month warranty.
- Sales of new industrial robots: When adding new production lines or replacing batches, we conduct cross-brand selection comparisons based on process requirements (including models of the same class as EFORT), and provide configuration and pricing plans.
- Applied technology services: Process programming, trajectory optimization, tap time potential, and model change formula management for GR6150-2200, with targeted tuning according to painting, coating, and glue application conditions.
- Research and development of automation equipment: Custom fixture ends, peripheral tooling, and safety fences for GR6150-2200, with interfaces designed according to EFT flange and IO standards.
- Robot rental: For short-term capacity or process validation periods, you can rent GR6150-2200 models in stock of the same class, including transportation, installation, and commissioning, with flexible lease terms and options for repurchase.
Common issues with this device
Is it easy to find spare parts for the GR6150-2200?
EFORT: The spare parts channel for this generation is smooth; we have in-stock or short-cycle channels for standard parts such as drivers, power modules, batteries, and teach pendant components; For sprayed explosion-proof models, it is recommended to configure consumables for annual inspection (grounding, sealing, certification effectiveness) according to explosion-proof regulations according to the annual maintenance contract.
With a nominal load of 15kg, how much can it actually handle?
The rated load is the static load limit of the flange surface. In actual selection, three factors must be considered: the self-weight of the end fixture (vacuum suction cup groups or grippers often account for 2–5kg), the inertia generated by the workpiece offload (checked according to the inertia ratio when the center of gravity deviates from the flange center), and the dynamic load during high-speed movement. The conventional engineering practice is to keep the "end + workpiece" within 70%–80% of the rated value to ensure cycle time and service life.
If the equipment's accuracy deteriorates after several years of use, how can it be restored?
According to the inspection order: first check whether the zero point is drifting (common after collision or battery depletion), then perform zero calibration; Check the reducer's return error (actual measurement of forward and reverse positioning deviation; if exceeded, disassemble or replace); Then check the installation base fastening and foundation settlement; Finally, trajectory compensation parameter restructuring. Most accuracy issues can be mostly restored after calibration and maintenance, so there is no need to rush into major repairs—we first release the inspection data before deciding on the plan.
Is the used GR6150-2200 worth buying?
With the increasing circulation of second-hand products, it is necessary to verify explosion-proof certification documents when purchasing spray painting models. Three essential items for second-hand procurement: comprehensive inspection reports (axial accuracy, driver status, insulation and battery), maintenance history and operating hours, controller generation, and software license integrity. Every used machine we sell comes with inspection records and a 12-month warranty, and we can also accept third-party inspections designated by customers.
Need technical support or procurement for this model?
Whether it's model selection comparison, installation and commissioning, or maintenance of in-use equipment, you can contact Henghuan. Tell us about your processes, loads, and equipment status, and we will provide third-party technical support and solution recommendations.
Contact Henghuan Back to the full series