HSR-JR615-2000 Six-axis robotic arm (manipulator)
15kg / 2000mm
HSR-JR615-2000 Specifications
HSR-JR615-2000 High-speed, high-precision general-purpose robot with a 2m span and a payload capacity of 15kg.
JR Series Industrial Six-Axis Robots · Series technical features
3-70kg · General Motors
There are 8 models: 603/607/612/615/620/630/670, covering weights from 3 to 70kg.
The official website states it uses self-developed control technology and high-performance servo motors.
Most models support ground, inverted, side-mounted, and installation in any direction.
Supports handling, palletizing, machine loading and cutting, stamping, gluing, grinding, and welding.
JR Series Industrial Six-Axis Robots · Other models in the same series
Compare load and reach to choose the model that best suits your process.
HSR-JR615-2000 model positioning and working condition adaptation
HSR-JR615-2000 This is an industrial robot model belonging to the HSR Robotics JR series industrial six-axis robots, with a rated load of 15kg, a motion radius of 2000mm, and a repeatability of ±0.05mm. HSR Robotics' technical foundation is Zhejiang University's technical background, with dual lines in education and industry, strong welding process packages and customization capabilities; The control platform is HSR Controller (HSC platform), and the programming ecosystem consists of graphical programming + scripting.
From the perspective of working condition adaptation, typical applications for positioning light loads (15kg) are:Machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium-sized parts。 The long reach (2000mm) covers multiple stations and large pallets, reducing robot movement or coordination with ground track expansion. ± 0.05mm repeatability is the standard level for six-axis industrial robots, covering most working conditions such as welding, handling, palletizing, and loading/unloading. The end fixture is counted as a load from the most important point—the total of gripper + workpiece + sensor should not exceed 80% of the rated value. Workpieces with high inertia (long rod/uneven load) should be checked separately.
| Parameters | Engineering interpretation and usage recommendations |
|---|---|
| Rated load capacity: 15kg | It is recommended to reserve a load margin of 20%–30%; Verification is made by combining end self-weight + workpiece + imbalanced load inertia, especially sensitive to high-speed conditions |
| Movement radius: 2000mm | Determine the radius of the workcell layout: bins, tooling, and fences are bounded by maximum arm span + safety distance; Verify the accessibility of each pick-and-place point during cross-station service |
| Repeatability: ±0.05mm | Repeatability ≠ absolute accuracy: Precision assembly requires external measurement closed-loop or visual guidance; Long-term accuracy trends rely on annual retest management |
| Number of axes: 6 | Six-axis all-posture capability, the preferred choice for complex trajectory and inclined surface operations |
| Controller: HSR Controller (HSC platform) | Decide on the process ecosystem, spare parts channels, and second-hand residual value; Currently, spare parts channels are smooth, and repair and upgrade paths are mature |
Control systems and common failure modes
The HSR-JR615-2000 is equipped with HSR Controller (HSC platform) controller, with a programming language and development environment of graphical programming + scripting. Maintenance of this generation of control platforms focuses on three basic components: power, storage, and cooling—most "sudden downtime" can be detected in advance when preventive maintenance is in place.
| Failure mode | Typical performance | Disposal recommendations |
|---|---|---|
| Driver alarm and encoder abnormality | Driver alarm and encoder abnormality | Included as a mandatory inspection item for annual maintenance, with spare parts stocked in advance |
| Teach pendant system failure | Teach pendant system failure | Initial interpretation of alarm codes by reference with manuals, remote diagnosis allows for early positioning |
| Bus communication was interrupted | Bus communication was interrupted | Daily inspection coverage, with abnormal trends (abnormal noises/temperature rise/errors) recorded |
| IO module abnormal | IO module abnormal | Quarterly dust removal maintenance and cabinet temperature monitoring |
| Maintenance projects | Cycle recommendations | Key points |
|---|---|---|
| Establish a parameter backup system | According to the manufacturer's manual cycle | Establish a parameter backup system |
| Batteries should be replaced periodically | By cycle | Batteries should be replaced periodically |
| Reducer lubrication management | According to the manufacturer's manual cycle | Reducer lubrication management |
| Cable and drag chain inspection | every six months | Insulation, shielding, and bending radius inspection of power and encoder lines, as well as wear of cables inside the drag chain, are the main causes of intermittent faults |
| Zero point and accuracy retest | Every year | Repeatability measured by dial gauges or laser trackers, drift trend digitization—accuracy degradation can be seen six months in advance |
| Control cabinet dust removal and fans | Every quarter | Filter cleaning, fan speed and noise checks, cabinet temperature recording; Dust environments shorten the cycle |
Henghuan's service capabilities for HSR-JR615-2000
This site is a third-party robotics technology service provider. The eight major business supports related to the HSR-JR615-2000 are as follows (sorted by service frequency of this model):
- Maintenance and repair: For on-site diagnostics, board-level maintenance, and annual maintenance contracts for HSR-JR615-2000, we follow SOPs and respond to Sichuan-Chongqing on the same day.
- Used & in-stock robot sales: There is a large stock of education, and the circulation of second-hand industry is gradually rising; Suitable for teaching and light industry conditions; In-stock HSR-JR615-2000 or equivalent models come with a full-function test report and a 12-month warranty.
- Sales of new industrial robots: When adding new production lines or replacing entire batches, we conduct cross-brand selection comparisons based on process requirements (including models of the same class as Washu Robotics), providing configuration and pricing plans.
- Applied technology services: Process programming, trajectory optimization, tap time potential tapping, and formula management for the HSR-JR615-2000, with targeted commissioning according to machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium parts.
- Research and development of automation equipment: Custom fixture ends, peripheral tooling, and safety fences for HSR-JR615-2000, with interfaces designed according to HSR Robotics flange and IO standards.
- Robot rental: For short-term capacity or process validation periods, HSR-JR615-2000 equivalent models in stock can be rented, including transportation, installation, and commissioning; flexible rental periods and repurchasing.
Common issues with this device
Is it easy to find spare parts for HSR-JR615-2000?
Washu Robotics has smooth spare parts channels for this generation, with regular parts such as drivers, power modules, batteries, and teach pendant components available in stock or short-cycle channels; Parameter backup system for establishing consumables is recommended to be configured according to the annual maintenance contract.
With a nominal load of 15kg, how much can it actually handle?
The rated load is the static load limit of the flange surface. In actual selection, three factors must be considered: the self-weight of the end fixture (vacuum suction cup groups or grippers often account for 2–5kg), the inertia generated by the workpiece offload (checked according to the inertia ratio when the center of gravity deviates from the flange center), and the dynamic load during high-speed movement. The conventional engineering practice is to keep the "end + workpiece" within 70%–80% of the rated value to ensure cycle time and service life.
If the equipment's accuracy deteriorates after several years of use, how can it be restored?
According to the inspection order: first check whether the zero point is drifting (common after collision or battery depletion), then perform zero calibration; Check the reducer's return error (actual measurement of forward and reverse positioning deviation; if exceeded, disassemble or replace); Then check the installation base fastening and foundation settlement; Finally, trajectory compensation parameter restructuring. Most accuracy issues can be mostly restored after calibration and maintenance, so there is no need to rush into major repairs—we first release the inspection data before deciding on the plan.
Is the used HSR-JR615-2000 worth buying?
There was a large stock of education, and second-hand industrial circulation was gradually emerging; Suitable for teaching and light industry conditions. Three essential items for second-hand procurement: comprehensive inspection reports (axial accuracy, driver status, insulation and battery), maintenance history and operating hours, controller generation, and software license integrity. Every used machine we sell comes with inspection records and a 12-month warranty, and we can also accept third-party inspections designated by customers.
Need technical support or procurement for this model?
Whether it's model selection comparison, installation and commissioning, or maintenance of in-use equipment, you can contact Henghuan. Tell us about your processes, loads, and equipment status, and we will provide third-party technical support and solution recommendations.
Contact Henghuan Back to the full series