KJ314 Six-axis robotic arm (manipulator)
Spray Robot · Load capacity: 15kg · Reach: 3100mm
KJ314 specifications
The explosion-proof coating robot features a φ70 large hollow inner diameter wrist, allowing spraying machines to be mounted on the upper arm. It is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, suitable for large workpieces. Equipped with a seventh axis, it enables a wider range of motion and highly free posture.
Model introduction
The explosion-proof coating robot features a φ70 large hollow inner diameter wrist, allowing spraying machines to be mounted on the upper arm. It is a lightweight explosion-proof spraying robot with built-in cables and a wide range of motion, suitable for large workpieces. Equipped with a seventh axis, it enables a wider range of motion and highly free posture. Typical applications include: handling and spraying.
Spray Painting Robot K Series (KF/KJ) · Series technical features
Kawasaki spray robots can handle a wide range of coatings from small to large products, and their extensive lineup of spraying series contributes to automating the coating process.
The KF and KJ series cover loads ranging from 5 to 15 kg, with a working radius of 1.2 to 3.1 meters, supporting workpieces of various sizes.
Supports multiple installation methods including floor, wall-mounted, and bracket, allowing for more flexible layout when paired with spraying stations.
Paired with Kawasaki explosion-proof E control cabinets, it can be applied in flammable and explosive painting workshops.
Kawasaki has accumulated extensive experience in the automotive finishing field, enabling uniform and high-quality spraying results.
Typical application scenarios
Common application processes for this model (click to view process details):
Spray Painting Robot K Series (KF/KJ) · Other models in the same series
Compare load and reach to choose the model that best suits your process.
KJ314 model positioning and working condition adaptation
KJ314 This is an industrial robot model belonging to Kawasaki's K Series (KF/KJ) spray painting robots, with a rated load of 15kg and a movement radius of 3100mm. Kawasaki's technical foundation is strong AS language capabilities and deep accumulation in semiconductor cleanliness and welding applications; The control platform is F series (partial) / E series, and the program ecosystem is AS language + teach pendant.
From the perspective of working condition adaptation, typical applications for positioning light loads (15kg) are:Machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium-sized partsCommon application processes for this model include handling and spraying. The extra-long reach (3100mm) is suitable for large workpieces and cross-line services, with attention to stiffness and vibration under large overhang postures. The end fixture is counted as a load from the most important point—the total of gripper + workpiece + sensor should not exceed 80% of the rated value. Workpieces with high inertia (long rod/uneven load) should be checked separately.
| Parameters | Engineering interpretation and usage recommendations |
|---|---|
| Rated load capacity: 15kg | It is recommended to reserve a load margin of 20%–30%; Verification is made by combining end self-weight + workpiece + imbalanced load inertia, especially sensitive to high-speed conditions |
| Movement radius: 3100mm | Determine the radius of the workcell layout: bins, tooling, and fences are bounded by maximum arm span + safety distance; Verify the accessibility of each pick-and-place point during cross-station service |
| Controllers F Series (partial) / E Series | Decide on the process ecosystem, spare parts channels, and second-hand residual value; Currently, spare parts channels are smooth, and repair and upgrade paths are mature |
Control systems and common failure modes
The KJ314 comes with some F series (partial) and E series controllers, with AS language and development environment as AS + teach pendant. Maintenance of this generation of control platforms focuses on three basic components: power, storage, and cooling—most "sudden downtime" can be detected in advance when preventive maintenance is in place.
| Failure mode | Typical performance | Disposal recommendations |
|---|---|---|
| 1FB/2FB board failure | 1FB/2FB board fault (driver control board aging) | Included as a mandatory inspection item for annual maintenance, with spare parts stocked in advance |
| The encoder battery is depleted, causing the origin to be lost | The encoder battery is depleted, causing the origin to be lost | Initial interpretation of alarm codes by reference with manuals, remote diagnosis allows for early positioning |
| The teach pendant's LCD and buttons are aging | The teach pendant's LCD and buttons are aging | Daily inspection coverage, with abnormal trends (abnormal noises/temperature rise/errors) recorded |
| Overcurrent alarm in the driver unit | Overcurrent alarm in the drive unit (motor or load abnormality) | Quarterly dust removal maintenance and cabinet temperature monitoring |
| Maintenance projects | Cycle recommendations | Key points |
|---|---|---|
| The battery is replaced annually | Every year | The battery should be replaced annually, and the original calibration should be performed after replacement |
| Reducer grease should be refilled periodically | By cycle | Reducer grease should be refilled periodically |
| Spare parts for boards and cards are recommended for key customers with in-house redundancy | According to the manufacturer's manual cycle | Spare parts for boards and cards are recommended for key customers with in-house redundancy |
| Cable and drag chain inspection | every six months | Insulation, shielding, and bending radius inspection of power and encoder lines, as well as wear of cables inside the drag chain, are the main causes of intermittent faults |
| Zero point and accuracy retest | Every year | Repeatability measured by dial gauges or laser trackers, drift trend digitization—accuracy degradation can be seen six months in advance |
| Control cabinet dust removal and fans | Every quarter | Filter cleaning, fan speed and noise checks, cabinet temperature recording; Dust environments shorten the cycle |
Henghuan's service capabilities for the KJ314
This site is a third-party robotics technology service provider. The eight major business supports related to the KJ314 are as follows (sorted by service frequency of each model):
- Maintenance and repair: For KJ314's on-site diagnosis, board-level repair, and annual maintenance contract—annual battery replacement, we follow SOP and respond to Sichuan-Chongqing on the same day.
- Used & in-stock robot sales: Medium second-hand circulation, E/F series materials and board-level repair channels we have accumulated; Existing KJ314 or equivalent models come with a full functional test report and a 12-month warranty.
- Sales of new industrial robots: When adding new production lines or replacing entire batches, we conduct cross-brand selection comparisons based on process requirements (including models of the same class as Kawasaki), and provide configuration and pricing plans.
- Applied technology services: Process programming, trajectory optimization, tap time potential, and formula change management for KJ314, with targeted commissioning according to handling and spraying conditions.
- Research and development of automation equipment: Custom fixture ends, peripheral tooling, and safety fences for KJ314, with interfaces designed according to Kawasaki flange and IO standards.
- Robot rental: For short-term capacity or process validation periods, KJ314 equivalent in-stock models can be rented, including transportation, installation, and commissioning, with flexible rental periods and flexible purchase options.
Common issues with this device
Is it easy to find KJ314 spare parts?
Kawasaki: The spare parts channel for this generation is smooth; we have in-stock or short-cycle channels for standard parts such as drivers, power modules, batteries, and teach pendant components; It is recommended to replace consumables for batteries annually according to the annual maintenance contract.
With a nominal load of 15kg, how much can it actually handle?
The rated load is the static load limit of the flange surface. In actual selection, three factors must be considered: the self-weight of the end fixture (vacuum suction cup groups or grippers often account for 2–5kg), the inertia generated by the workpiece offload (checked according to the inertia ratio when the center of gravity deviates from the flange center), and the dynamic load during high-speed movement. The conventional engineering practice is to keep the "end + workpiece" within 70%–80% of the rated value to ensure cycle time and service life.
If the equipment's accuracy deteriorates after several years of use, how can it be restored?
According to the inspection order: first check whether the zero point is drifting (common after collision or battery depletion), then perform zero calibration; Check the reducer's return error (actual measurement of forward and reverse positioning deviation; if exceeded, disassemble or replace); Then check the installation base fastening and foundation settlement; Finally, trajectory compensation parameter restructuring. Most accuracy issues can be mostly restored after calibration and maintenance, so there is no need to rush into major repairs—we first release the inspection data before deciding on the plan.
Is the used KJ314 worth buying?
Second-hand circulation is moderate, and we have accumulated experience in E/F series materials and board-level repair channels. Three essential items for second-hand procurement: comprehensive inspection reports (axial accuracy, driver status, insulation and battery), maintenance history and operating hours, controller generation, and software license integrity. Every used machine we sell comes with inspection records and a 12-month warranty, and we can also accept third-party inspections designated by customers.
Need technical support or procurement for this model?
Whether it's model selection comparison, installation and commissioning, or maintenance of in-use equipment, you can contact Henghuan. Tell us about your processes, loads, and equipment status, and we will provide third-party technical support and solution recommendations.
Contact Henghuan Back to the full series