SIA10F Six-axis robotic arm (manipulator)
10kg / 720mm working radius
SIA10F specification parameters
SIA10F supports a 10kg load, has a 720mm reach, and features a 7-axis multi-joint design.
SIA Series · Series technical features
Single-arm 7-axis system, flexible human-machine collaboration.
Equipped with Yaskawa's self-developed Σ-7 servo system, it operates swiftly and offers high repeatability.
Supports loads from 0.5kg to 800kg, covering welding, handling, palletizing, spraying, and other scenarios.
High IP protection rating, suitable for harsh working conditions such as dust, oil stains, and humidity.
SIA Series · Other models in the same series
Compare load and reach to choose the model that best suits your process.
SIA10F model positioning and working condition adaptation
SIA10F It belongs to the Yaskawa SIA series industrial robot model, with a rated load of 10kg and a motion radius of 720mm. Yaskawa's technical foundation is self-developed servo technology, fast motion response, and an open secondary development ecosystem for MotoPlus; The control platform is FS100, and the program ecosystem consists of INFORM language + MotoPlus open platform.
From the perspective of working condition adaptation, typical applications for light load (10kg) positioning are:Machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium-sized parts。 The short-span (720mm) model has a compact structure, suitable for dense workstations and close-range pick-and-place operations, with a small working unit footprint. The end fixture is counted as a load from the most important point—the total of gripper + workpiece + sensor should not exceed 80% of the rated value. Workpieces with high inertia (long rod/uneven load) should be checked separately.
| Parameters | Engineering interpretation and usage recommendations |
|---|---|
| Rated load 10kg | It is recommended to reserve a load margin of 20%–30%; Verification is made by combining end self-weight + workpiece + imbalanced load inertia, especially sensitive to high-speed conditions |
| Radius of motion: 720mm | Determine the radius of the workcell layout: bins, tooling, and fences are bounded by maximum arm span + safety distance; Verify the accessibility of each pick-and-place point during cross-station service |
| Number of axes: 7 | Six-axis all-posture capability, the preferred choice for complex trajectory and inclined surface operations |
| Controller FS100 | Decide on the process ecosystem, spare parts channels, and second-hand residual value; Currently, spare parts channels are smooth, and repair and upgrade paths are mature |
| Rated load capacity: 10kg | Source: official YASKAWA product page |
| Movement radius: 720mm | Source: official YASKAWA product page |
Control systems and common failure modes
The FS100 controller equipped with the SIA10F features a programming language and development environment based on INFORM language + MotoPlus open platform. Maintenance of this generation of control platforms focuses on three basic components: power, storage, and cooling—most "sudden downtime" can be detected in advance when preventive maintenance is in place.
| Failure mode | Typical performance | Disposal recommendations |
|---|---|---|
| Low battery voltage alarm | Low battery voltage alarm (risk of loss of origin data, requires power replacement while powered on) | Included as a mandatory inspection item for annual maintenance, with spare parts stocked in advance |
| Servo driver alarm | Servo driver alarm (overcurrent/overload, often related to motor aging or excessive load) | Initial interpretation of alarm codes by reference with manuals, remote diagnosis allows for early positioning |
| Encoder cable interference or core breakage causing position deviation alarms | Encoder cable interference or core breakage causing position deviation alarms | Daily inspection coverage, with abnormal trends (abnormal noises/temperature rise/errors) recorded |
| High-frequency faults in the teach pendant's buttons and cables | High-frequency faults in the teach pendant's buttons and cables | Quarterly dust removal maintenance and cabinet temperature monitoring |
| Maintenance projects | Cycle recommendations | Key points |
|---|---|---|
| Battery replacement once a year (strict requirement to preserve origin data) | Every year | Battery replacement once a year (strict requirement to preserve origin data) |
| Refuel the gearbox grease according to operating hours | By operating hours | Refuel the reducer grease according to operating hours, paying attention to the grease grade |
| Regularly inspect the servo motor carbon brushes (old model) and brakes | Periodically | Regularly inspect the servo motor carbon brushes (old model) and brakes |
| Cable and drag chain inspection | every six months | Insulation, shielding, and bending radius inspection of power and encoder lines, as well as wear of cables inside the drag chain, are the main causes of intermittent faults |
| Zero point and accuracy retest | Every year | Repeatability measured by dial gauges or laser trackers, drift trend digitization—accuracy degradation can be seen six months in advance |
| Control cabinet dust removal and fans | Every quarter | Filter cleaning, fan speed and noise checks, cabinet temperature recording; Dust environments shorten the cycle |
Henghuan's service capabilities for SIA10F
This site is a third-party robotics technology service provider. The eight major business supports related to SIA10F are as follows (ranked by service frequency for each model):
- Maintenance and repair: For SIA10F's on-site diagnostics, board-level maintenance, and annual maintenance contract—battery replacement once a year (a strict requirement to preserve origin data), we follow SOPs and respond to Sichuan-Chongqing on the same day.
- Used & in-stock robot sales: High residual value second-hand, ample spare parts for YRC1000/DX200; For XRC/NX100 old cabinets, it is recommended to evaluate the control system; The SIA10F or equivalent models in the inventory come with a full-function test report and a 12-month warranty.
- Sales of new industrial robots: When adding new production lines or replacing entire batches, we conduct cross-brand selection comparisons based on process requirements (including Yaskawa models of the same class) and provide configuration and pricing plans.
- Applied technology services: Process programming, trajectory optimization, tap time potential, and model change formula management for SIA10F, with targeted commissioning for machine tool loading and unloading, 3C assembly, inspection, and handling of small and medium parts.
- Research and development of automation equipment: Custom fixture ends, peripheral tooling, and safety fences for SIA10F, with interfaces designed according to Yaskawa flange and IO standards.
- Robot rental: During short-term capacity or process validation periods, SIA10F equivalent in-stock models can be rented, including transportation, installation, and commissioning, with flexible rental periods and flexible purchase options.
Common issues with this device
Is it easy to find spare parts for the SIA10F?
Yaskawa: The spare parts channel for this generation is smooth; we have in-stock or short-cycle channels for standard parts such as drivers, power modules, batteries, and teach pendant components; Replace the battery once a year (a strict requirement to preserve origin data). It is recommended to configure the battery according to the annual maintenance contract.
With a nominal load of 10kg, how much can it actually handle?
The rated load is the static load limit of the flange surface. In actual selection, three factors must be considered: the self-weight of the end fixture (vacuum suction cup groups or grippers often account for 2–5kg), the inertia generated by the workpiece offload (checked according to the inertia ratio when the center of gravity deviates from the flange center), and the dynamic load during high-speed movement. The conventional engineering practice is to keep the "end + workpiece" within 70%–80% of the rated value to ensure cycle time and service life.
If the equipment's accuracy deteriorates after several years of use, how can it be restored?
According to the inspection order: first check whether the zero point is drifting (common after collision or battery depletion), then perform zero calibration; Check the reducer's return error (actual measurement of forward and reverse positioning deviation; if exceeded, disassemble or replace); Then check the installation base fastening and foundation settlement; Finally, trajectory compensation parameter restructuring. Most accuracy issues can be mostly restored after calibration and maintenance, so there is no need to rush into major repairs—we first release the inspection data before deciding on the plan.
Is the used SIA10F worth buying?
Strong residual value on the used market, ample spare parts for YRC1000/DX200; For XRC/NX100 old cabinets, it is recommended to evaluate the control system. Three essential items for second-hand procurement: comprehensive inspection reports (axial accuracy, driver status, insulation and battery), maintenance history and operating hours, controller generation, and software license integrity. Every used machine we sell comes with inspection records and a 12-month warranty, and we can also accept third-party inspections designated by customers.
Need technical support or procurement for this model?
Whether it's model selection comparison, installation and commissioning, or maintenance of in-use equipment, you can contact Henghuan. Tell us about your processes, loads, and equipment status, and we will provide third-party technical support and solution recommendations.
Contact Henghuan Back to the full series